5G industrial routers have been widely used in the M2M industry in the IoT industry chain, such as smart factories, smart medical, smart ports, and new media video transmission. On the basis of the computer Internet, the Industrial Internet of Things uses sensor technology, data communication and other technologies to build an "Internet of Things" covering everything in the world. Its essence is t···

4G DTU data transmission terminal converts serial data and IP data to each other and transmits them through a wireless communication network. It has the advantages of rapid networking, flexible expansion, short construction period, and low cost. It is based on 4G/3G/2.5G/NB- The IoT/Cat1 network is a bearer network, providing industrial users with wireless data transmission channels over TCP/IP, r···

Industrial 5G CPE is a high-performance terminal device based on the 5G network. It uses domestic chips and uses industry-leading 5G technology to convert 5G signals into WLAN signals and network cable access to provide industrial users with wireless broadband access services. The 5G module supports 5G independent networking (SA) and non-independent networking (NSA) two network architectures, with···

4G DTU data transmission terminal uses 4G network for transparent data transmission. The device is called 4G network wireless data two-way transparent transmission terminal. The process of converting serial data into IP data or converting IP data into serial data and transmitting is called Transparent data transmission, let's take a look at the functions and characteristics of the 4G DTU data tran···

After the assembly is completed, when using the product, the 4G DTU needs to be installed on the guide rail in the protective box, and the antenna should be led out to the box and fixed to an appropriate position.

With the rapid development of the Internet of Things, 4G DTU is also widely used in PLC wireless communication; automatic control of data acquisition equipment, monitoring equipment, medical equipment and electronic instruments; automatic meter reading and charging systems for water, electricity, gas, and heating; LED screen wireless Transmission of text, pictures and wireless control; alarm monit···

5G industrial router intelligent IoT communication application. Remote data acquisition and monitoring fields such as base station transceiver, ATM monitoring, power station monitoring, pump station monitoring, etc.;

N2N is a two-layer virtual private network that allows users to develop typical P2P applications in the network instead of developing at the application layer. This means that the user can transparently get the local address, as long as the new IP address is in a subnet, no matter where the two machines are, they can ping each other.

"Smart Port" has stringent requirements for communication connections with low latency, large bandwidth, and high reliability. The communication system of the large-scale special operation equipment of the automated terminal must meet the efficient and reliable transmission of control information and multiple channels of video information. At present, the optical fiber and Wi-Fi communication meth···

Typical 5G CPE Application Scenarios,5G CPE is a type of 5G terminal equipment. It receives the 5G signal sent by the operator's base station, and then converts it into a Wi-Fi signal or a wired signal, allowing more local devices (mobile phones, tablets, computers) to access the Internet.